EasyManua.ls Logo

Sirius Range Hoods SU901 - User Manual

Default Icon
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTALLATION
INSTRUCTIONS
CARE AND USE MANUAL FOR:
BUILT-IN RANGE HOODS
Models covered by this instructions:
SU900 -SUT900 - SUE900 - SU901 - SU902 - SU903
SU908 - SU906 - SU913
*** BEFORE INSTALLATION ***
ENSURE THERE IS NO VISIBLE OR HIDDEN DAMAGE SUSTAINED
DURING SHIPPING
*** SHIPPING DAMAGE ***
MUST BE REPORTED WITHIN 5 DAYS OF RECEIPT
Question and Answer IconNeed help?

Do you have a question about the Sirius Range Hoods SU901 and is the answer not in the manual?

Summary

Before You Begin

Test Run Recommendation

Advisable to test run the range hood before installation.

Installation Prerequisites

Read manual, units weigh ~125lbs, requires two people for installation.

Ducting

External Venting Requirements

Plan direct route, vent through roof or wall, use rigid metal ducting.

Venting Safety Warning

Do not vent into confined spaces like walls, ceilings, attics.

Duct Run Calculation

Calculate max duct run by measuring linear feet and adding elbows/transitions.

Electrical

Electrical Work Warning

All electrical work must be performed by a qualified electrician. Adhere to codes.

Electrical Supply Requirements

Requires 120V/60Hz, 3amp supply. Connection at top of unit.

Installation

Minimum Installation Height

Minimum distance between hob and lowest part of hood is 30 inches.

Model Applications and Cut-outs

Describes installation options for various models and their cut-out dimensions.

Installing SCH31 A with Specific Models

How to install SCH31A liner with SU900/SUT900/SUE900 using pressure springs.

Installing SU900;SUT900;SUE900 without SCH31 A

How to install specific models without a liner using pressure springs.

Fixing Unit to Wooden Hood Base

How to fix SUT900 unit to the edge of the wooden hood base using four holes.

Installing Pro Liner with SU901

How to install the Pro Liner with SU901 model, aligning cut-out and screwing.

Liner Depth Adjustment

How to install the front part of the liner adjusting it to cabinet depth.

Installing SU902, SU903, SU908 Models

How to install SU902, SU903, SU908 models using pressure springs or base holes.

Connecting Electricity and Ducting

Instructions for connecting electrical supply and ensuring flaps move freely.

Rear Vented Version Configuration

How to configure for rear venting by repositioning the motor.

Ducting Connection and Requirements

Connect ducting to exhaust point using duct tape, avoid screws for recirculating.

Installation SU906

Pre-installation Checks and Preparations

Check parts, read instructions, assemble LED bar, remove filters.

SU906 Cut-out Dimensions

Provides specific dimensions for SU906 model cut-outs in cabinets.

Inserting and Fixing Hood

How to insert the hood into the cabinet and fix it using screws.

Installing and Connecting LED Bar

How to insert the LED bar and connect its two-pin connector.

Installing Oil Container

How to hook the oil container onto the hood, avoiding damage.

Operating Procedures

General Operation Advice

Ensure filters are in place, keep clean, turn fan on, avoid flammable substances, manage cooking flames.

Model Function Overviews

Describes functions (Light, Blower Speeds, Timer) for different models.

RC001 Radio Control

Technical Data and Description

Details specifications and button functions of the RC001 remote control.

Operation Modes and Setup

Covers initial setup, standard configuration, and multiple system considerations.

Transmission Code Management

Steps to change, learn, and reset radio control transmission codes.

Emergency Button and Warnings

How to use the emergency button and important warnings about adjustments.

Maintenance

Battery Replacement and Filter Indicator

Warning for battery replacement and explanation of the filter cleaning indicator.

Blower Operation and Filter Cleaning

Advice on blower use and instructions for cleaning grease and carbon filters.

Cleaning the Hood

How to clean internal and external parts of the hood, avoiding abrasives.

Light Bulb and LED Bar Replacement

Instructions for replacing light bulbs and substituting LED bars for specific models.

Three Year Limited Warranty

Warranty Registration and Service

How to register for warranty and notify for service.

Warranty Coverage and Exclusions

Details what is covered and what is excluded under the warranty terms.

Sirius Range Hoods SU901 Specifications

General IconGeneral
BrandSirius Range Hoods
ModelSU901
CategoryVentilation Hood
LanguageEnglish

Related product manuals