To Next PageTo Next Page
Need help?Do you have a question about the Sirius Range Hoods SU906 and is the answer not in the manual?
Read manual before installation, use for intended purpose, ensure qualified installation, electrical safety, and proper ducting.
Plan direct route, use rigid metal ducting, avoid plastic, limit turns, use 6"/8" outlet, 18" clearance to first elbow.
Work by qualified electrician, codes, power off, grounding, 120V/60Hz, 3A supply, ceiling run.
Refer to electrical supply section; ensure power is off; make electrical connections; check plastic flaps move freely.
Check for damage, read instructions, assemble LED bar, remove filters/oil collector, follow precautions.
Inserting hood, securing to cabinet, installing LED bar, and attaching oil container.
Connect ducting to fan exhaust point using duct tape on all joints; do not use screws.
In case of fire, switch off hood/cooktop, smother flames with lid. Evacuate and call fire department. Do not use water.
Clean grease filters every two weeks; replace carbon filters every 6 months; cleaning indicator available.
Turn off power, ensure cool. Inspect fixture, carefully remove glass blocking ring to replace bulb.
General| Brand | Sirius |
|---|---|
| Model | SU906 |
| Width | 90 cm |
| Number of Motors | 1 |
| Lighting | LED |
| Material | Stainless Steel |
| Voltage | 220-240V |
| Frequency | 50/60 Hz |
| Control Type | Electronic |
| Filter Type | Aluminum |
