Why does my Sirius XM RAdio Car Receiver have audio that fades or has static?
First, check all cables for a firm and secure connection. The issue might also be interference from another commercial or broadcast FM station, in which case you'll need to find an unused FM channel in your area. Alternatively, try connecting the audio using the Aux In Cable or a Cassette Adapter, or consider using an FM Direct Adapter.
Why is my Sirius XM RAdio Onyx Car Receiver not acquiring a signal?
Ensure that your vehicle is outdoors with a clear view of the sky. Also, confirm that the Magnetic Mount Antenna is mounted outside of the vehicle and away from any obstructions. If using your Sirius XM RAdio Car Receiver at home, position the antenna in a south-facing window.
What to do if my Sirius XM RAdio Onyx says 'Check Antenna Connection'?
First, ensure the antenna cable is firmly and securely plugged into the PowerConnect Vehicle Dock and that the cable isn't bent or broken. If the issue persists, turn your Sirius XM RAdio Car Receiver off and then on to reset the message. If the message continues to appear, the Magnetic Mount Antenna cable may be damaged, and you might need to replace the antenna.
Why do Traffic and Weather channels sound different on Sirius XM RAdio?
Traffic and Weather channels on Sirius XM Radio sound different from other channels because they use a different audio technology.
What to do if Sirius XM RAdio channel is off air?
If a channel on your Sirius XM Radio is off air, simply tune to another channel.
What to do if my Sirius XM RAdio audio fades?
If the audio on your Sirius XM Radio is fading, begin by checking all cables to ensure they have a firm and secure connection.
What to do if the demo is playing on Sirius XM RAdio?
If the demo is playing on your Sirius XM Radio, make sure your Indoor/Outdoor Home Antenna is properly connected and free from obstructions, as this issue can occur if the antenna isn't connected or the XM signal isn't being received. You can also press and hold the Select button for 10 seconds to exit Demo Mode or disable Demo Mode.
What to do if my Sirius XM RAdio has no audio?
If you're not getting any sound from your Sirius XM Radio, first, ensure all cables are firmly connected between your Onyx and your stereo system or powered speakers. Next, verify that you've selected the correct input source on your stereo. You might also try a different source to check. Finally, increase the audio level on your Onyx.
General| Manufacturer | SiriusXM |
|---|---|
| Connectivity | Auxiliary Input |
| Power Source | 12V DC |
| Power Supply | 12V DC |
| Subscription | Required |
| Model | Onyx EZR |
| Audio Output | 3.5mm headphone jack |
Provides essential safety instructions and guidelines for device care to prevent injury and damage.
Guides users on selecting an optimal and safe location for the Onyx radio in their vehicle.
Provides instructions for installing either the dash mount or the vent mount for the Onyx vehicle dock.
Details how to properly mount the magnetic antenna on various vehicle types for optimal signal reception.
Explains how to route and hide the antenna cable cleanly within the vehicle.
Guides on connecting the antenna and power adapter to the vehicle dock for power and signal.
Details four options for connecting the Onyx audio output to the vehicle's stereo system.
Details the steps for activating your Onyx radio service, either online or by phone.
Instructions on how to tune to a specific channel or browse channels by category.
Enables locking access to channels or categories using a 4-digit code.
Guides on identifying unused FM channels for optimal PowerConnect audio transmission.
Provides solutions for issues related to acquiring a satellite or terrestrial signal.
Addresses issues with audio playback through Aux In, Cassette Adapter, or FM radio.
To Next Page
