What to do if Sirius XM RAdio says Stream Closed?
If you see a 'Stream Closed' message on your Sirius XM RAdio, it could be because your account username and password have been used at another location, disconnecting your Radio from the service. Also, the Radio might have timed out due to inactivity. To resolve this, turn your Radio off and on again.
Why does my Sirius XM RAdio say login failed?
If the login fails on your Sirius XM RAdio, it could be due to several reasons. First, verify that you've entered your SIRIUS or XM username and password correctly. If the issue persists, ensure you have a valid subscription to the Premium SiriusXM Internet Radio service. If you have XM only, make sure you've updated your password to use the SiriusXM TTR1 Radio.
Why the Network Wizard does not find my wireless network on Sirius XM RAdio?
If the Network Wizard on your Sirius XM RAdio can't find your wireless network, it could be because your network has a hidden name (SSID). In this case, you'll need to manually configure your wireless network connection. Alternatively, the wireless signal from your access point might be too weak. Try moving the Radio closer to your access point to see if the Network Wizard detects your network.
Why the Network Wizard fails before the Radio connects to my network on Sirius XM RAdio?
If the Network Wizard fails before your Sirius XM RAdio connects to your network, it might be because your network has DHCP disabled. If this is the case, you'll need to manually configure your network connection.
What to do if Sirius XM RAdio is waiting for Ethernet?
If your Sirius XM RAdio displays 'Waiting for Ethernet,' plug an Ethernet wire into your home/office network, and then plug the other end into the Ethernet connection inside the compartment at the rear of the Radio. If a wired connection isn't available, switch to a wireless network connection.
Why does my Sirius XM Radio say 'Failed to connect'?
The 'Failed to connect' message on your Sirius XM Radio may appear because the network information you entered is incorrect, or you might have entered an incorrect password for a secure wireless network. Also, if you manually configured a network connection, you may have entered one or more incorrect settings. To resolve this, verify and re-enter the information.
What to do if my Sirius XM Radio says 'Stream Closed'?
The 'Stream Closed' message on your Sirius XM Radio can appear if your account user name and password have been used at another location, disconnecting your radio from the service, or if the radio has timed out due to inactivity. To fix this, turn your radio off and on again.
What to do if my Sirius XM Radio says 'Waiting for Ethernet'?
If your Sirius XM Radio displays 'Waiting for Ethernet', plug an Ethernet wire into your home or office network, then plug the other end into the Ethernet connection inside the compartment at the rear of the radio. If a wired Ethernet connection isn't available, switch to a wireless network connection.
What to do if my Sirius XM Radio is buffering?
If your Sirius XM Radio is buffering, ensure that your internet connection hasn't been interrupted. You can also try turning your radio off and on again.
What to do if the Network Wizard does not find my wireless network on Sirius XM Radio?
If the Network Wizard on your Sirius XM Radio doesn't find your wireless network, it could be because your wireless network has a hidden name (SSID). In this case, you'll have to manually configure your wireless network connection or use a wired network connection. Alternatively, the wireless signal from your access point may be too weak. Try moving the radio closer to your access point to see if the Network Wizard then finds your wireless network.
General| Brand | SiriusXM |
|---|---|
| Model | TTR1 |
| Antenna | Built-in |
| Audio Output | Headphone Jack |
| Channels | SiriusXM |
| Presets | 10 |
| Power Source | Rechargeable battery or AC adapter |
| Connectivity | Wi-Fi |
Guidelines for safe operation and maintenance of the SiriusXM TTR1 Radio.
Guides on connecting the SiriusXM TTR1 Radio to a wireless or wired network.
Instructions for logging into the SiriusXM account for service activation.
Step-by-step guide on how to tune to channels and view categories.
Instructions for setting up and managing the dual alarm clocks on the radio.
How to lock/unlock channels or categories using a 4-digit code.
Configure user name, password, and status for the SiriusXM service.
Detailed steps for entering and managing user name and password.
Restoring the radio to its original factory default settings.
Guide to manually configure wireless network connection details.
Guide to manually configure wired network connection details.
Common reasons and solutions for "Login failed" errors.
To Next Page
