CAMERA
OK
CAMERA
1.
2.
1.
2.
3.
4.
5.
6.
3.
6.
4.
5.
USB DRIVE
1.
Access cut files from a connected USB drive
File selection — Displays folders and files on connected USB flash
drive so the desired cut file can be opened
Start cut — Starts job using current settings
9
USB DRIVE
FILE
FOLDER NAME OPEN
START CUT
2.
Use the camera for accurate tool registration
Registration Snapshot — Crosshair overlay offers a visual preview
of the tool orientation
Zoom — Zooms in or out on the current snapshot
Camera Snapshot — Takes a snapshot at the tool’s current
position
OK — Sets tool position
Directional Arrows — Moves the machine head and material for a
different camera view
Camera Light — Changes the brightness of the camera light
1.
2.
To Next Page
Loading...
