E |3
9 Bring up the WL-370
Connect the supplied power-adapter to the power inlet port and connect it to
a wall outlet. Switch the WL-370 on by flipping the switch on the back of the
device. The WL-370 automatically enters the self-test phase. During self-test
phase, the Power LED will be lit continuously to indicate that this product is in
normal operation.
10 Initial Setup WL-370
LOGIN procedure
1. OPEN your browser (e.g. Internet Explorer).
2. Type http://192.168.0.1 in the address bar and press [Enter]
To Next Page
Loading...
