Sitecom WLR-5000 - Bring up the Wlr-5000; Initial Setup Wlr-5000

E |3
9 Bring up the WLR-5000
Connect the supplied power-adapter to the power inlet port and connect it to
a wall outlet. Switch the WLR-5000 on by flipping the switch on the back of
the device. The WLR-5000 automatically enters the self-test phase. During
self-test phase, the Power LED will be lit continuously to indicate that this
product is in normal operation.
10 Initial Setup WLR-5000
LOGIN procedure
1. OPEN your browser (e.g. Internet Explorer).
2. Type http://192.168.0.1 in the address bar and press [Enter]