E |3
Basic Settings
Mode Allows you to set the AP to AP, Station, Bridge or WDS mode.
Band Allows you to set the AP fixed at 802.11b or 802.11g mode. You can
also select B+G mode to allow 802.11b and 802.11g clients at the same time.
For the 5GHz mode you can set 802.11a, 802.11n or 802.11a/n mode.
ESSID This is the name of the wireless signal which is broadcasted. All the
devices in the same wireless LAN should have the same ESSID.
Channel The channel used by the wireless LAN. All devices in the same
wireless LAN should use the same channel.
To Next Page
Loading...
