Product Installation
You can place the access point on a desk or other flat surface, or you can mount it on a
wall. For optimal performance, place your access point in the center of your home (or
your office) in a location that is away from any potential source of interference, such as a
metal wall or microwave oven. This location must be close to a power connection and
your ADSL/Cable modem.
Connect the supplied power-adapter to the power inlet port and connect it to a wall outlet.
Switch the access point on by flipping the switch on the back of the device. The access
point automatically enters the self-test phase. During self-test phase, the Power LED will
be lit continuously to indicate that this product is in normal operation.
To Next Page
Loading...