4
SYMBOLS FOR INDICATIONS AND/OR RULES
7) Summarizes all the potential and serious
dangers that one risks when working improperly
on the machine during assembly, use, maintenance
or repair.
10) Indicates in feet (0’-4’) the width of
the machine on the right and left side.
5) Use paper or cardboard to check for and/or
clean any leaks from cylinders and oleo dynamic
components in general. Never touch with bare
hands, as it is harmful to the skin.
6) Warns against the potential and serious dangers
to the driver and/or other persons who are near or
on the machine or tractor when the tractor is used
improperly and/or incautiously.
11) Indicates the maximum speed during
transport (19 MPH - 30 Km/h)
8) Indicates where a hook should be attached to the
machine or to part of it if it needs to be lifted.
9) Indicates the components to be assembled on the
right or left side of the machine. The R and L sides
of the machine are usually determined by standing
behind the machine and looking forward.
To Next Page
Loading...
