3
1) GUIDE TO THE SIGNS AND SYMBOLS USED ON THE
MACHINE
IMPORTANT
These signs and symbols give information to the operator on how to make the best
use of the machine so as to prolong life, avoid damage, optimise work and, above all,
to avoid injury to the operator and anyone within range of the machine. Note well:
most of the symbols that you will find below are located on the machine, but some
are only in this manual and indicate how to act or what must be done during
assembly, when maintenance or repairs are being done, etc..
WARNING SIGNS
DANGER SIGNS
1) Before beginning operations, read the
instruction manual carefully.
2) Before doing any maintenance or repair
work, stop the machine at a suitable spot. Turn
off the tractor motor, apply the brake, remove
the key from the ignition and consult this
manual.
3) Warns against potential serious danger of
hands being crushed.
Keep away.
4) Warns against potential serious danger of
injury to the feet.
Keep away.
To Next Page
Loading...
