SIZZIX Big Shot Express - Die-Cutting Procedures; Originals and Bigz Die Sandwich Guide

Using an Originals
™
or Bigz
™
Die
Place an Originals or Bigz Die on a Cutting Pad with foam side
up. Place paper or desired material to be cut on top of the die.
Place the second Cutting Pad or Premium Crease Pad on top
of the paper or material to create a “sandwich.”
Slide the “sandwich” into the roller opening as far as it will go.
Let go of the “sandwich” and gently depress the motor switch,
pushing hardest on the side of the switch pointing to the
direction you wish your “sandwich” to go. When the die
“sandwich” is completely through the rollers, then and only
then, is it safe to remove or handle your die and die-cut shape.
Your die-cut shape is ready to use.
Paper
Die
Cutting Pads
Cutting Pad
Paper
Die
Crease Pad
(Bigz XL Dies require
Extended Cutting/Crease Pads.)
“Sandwich”
Standard Die Crease-rule Die