7
Burst Mode
• Burst mode: 3 pictures, 5 pictures, 10 pictures. Activate burst mode, click
"shooting", and it will take several pictures at one time.
Videolapse
• Videolapse: 1 second, 2 seconds, 5 seconds, 10 seconds, 30 seconds, and 1
minute. Select an interval then start recording a video file.
Loop Recording
• Loop recording segment lengths: 3 minutes, 5 minutes, and 10 minutes. When
Loop Recording is selected, videos will be saved in short segments. It will also
maximize the use of the memory card by recording over the oldest file in the card
to allow continuous recording.
Date/Time Stamp
• Enabling Date/Time Stamp will put a mark on the video for the viewer to see the
time, date, and duration of the recorded file.
Slow Video Recording
• After this function is turned on, the real shots of the video are all in slow motion, -
2X is 2 times slower, and the highest is 8 times.
Logo Watermark
• You can choose to turn the logo watermark on or off.
Photolapse
• Photolapse interval: 3 seconds, 5 seconds, 10 seconds, and 20 seconds. Press the
shutter button to start taking photos in the set interval. Press the shutter button
again to stop the photo-taking process.
Photo Quality
• Photo quality options: High quality, Standard quality, and Economy.
View Angle
• It has Wide/Middle/Narrow view angles. The wider the wide-angle, the wider the
view.
Gyro Stabilization
• Image stabilization function, anti-shake performance is better.
Code Stream
• It has three streams: high/medium/low.
To Next Page
Loading...
