9
Screen Saver
• The screen saver has five time-period options: 30 seconds, 1 minute, 3 minutes, 5
minutes, and Off. The screen saver means that the device automatically turns off
the screen and goes to sleep when no operation is detected.
Light Source Frequency
• You can select between two light-source frequencies: 50Hz and 60Hz, depending
on your geographic location and/or requirement.
Device ID
• You can change the device ID number.
Wi-Fi
• You can modify the device's Wi-Fi name and password.
Default Settings
• Selecting this option will reset all settings of the device to their default settings.
Version
• View version information of the current device.
Micro SD Card
To save videos and photos, you need to use a micro SD card. Please use a memory card
that meets the required specifications. During the shooting process, if the space on the
memory card is completely filled, the action camera will stop recording, and the display
will show "Memory Card Full".
Note: Be careful when handling the memory cards. Avoid contact with liquids, dust, and
small debris. For your files' safety, turn off your action camera before inserting or
removing a memory card. Review the memory card manufacturer's instructions for use
within the appropriate temperature range.
Insert the Micro SD Card
• Remove the battery cover, remove the battery, then insert the micro SD card into
the card slot, then insert the battery and place the battery cover back on.
Reformat Micro SD Card
• Reformatting the micro SD card is essential for optimal performance. It is
recommended to format the card before using it for the first time. Additionally,
periodic formatting is advised to maintain an organized file system.
To Next Page
Loading...
