Resolution
TV Out
OSD Mode
Video Lapse
Photo Lapse
Loop Recording
1/6
Setup
>
>
RESOLUTION Changing to a higher resolution will have more detail in your ›
video at the expense of file size. A lower resolution has a smaller filesize
but will have less details in your video. Conversely, a higher resolution will
contain more detail. Available only in Video modes.
Note: FPS (Frames Per Second) is part of the options in video resolution:
The higher the FPS, the more images will be displayed per second,
and the smoother the movement in the video is, at the expense of filesize.
TV OUT › Enables video output via HDMI cable to your TV.
On-Screen Display. When enabled, information and icons will be OSD MODE ›
displayed on the screen indicating what features are activated, current mode,
recording, elapsed time, number of photos left, battery status, etc.
VIDEO LAPSE: Choose time interval options for video timelapse mode.
PHOTOLAPSE: Choose time interval options for photo timelapse mode.
LOOP RECORDING Auto-saves your video in small sections, depending on ›
selected length. It will record over your oldest video once there is no more
space on your memory card.
SETUP MENU - Screen 1 of 7
TIP: Up / Down Use the buttons
to navigate through the menu.
Use the button to selectShutter
an item.
To exit an item in the Setup
menu, or to get back to the main
Icons, press the button Mode
once.
Note: Screen arrangement and feature availability may vary depending on rmware version.
To Next Page
Loading...
