To Next PageTo Next Page
Need help?Do you have a question about the SKC AirChek Connect and is the answer not in the manual?
Verify all items associated with the Cat. No. ordered. Contact SKC if missing items.
Set up charging train and completely charge the battery pack(s) before operating.
Instructions on how to turn the pump on and off, and auto-off features.
Explains battery status icon and bars indicating charge remaining.
Describes how to navigate through menus and screens using touch buttons.
Details default settings and how users can change them via device submenus.
Steps to adjust pump time, format, and date settings.
How to change display units for temperature and atmospheric pressure.
How to configure screen dimming, auto-lock, and secure lock features.
How to set the desired flow rate for the pump.
Instructions for setting/calibrating flow rates between 5-500 ml/min.
Guide to setting and calibrating flow rates using Constant Pressure Mode.
Overview and setup for manual, timed, and preset sampling modes.
Step-by-step instructions to execute a manual sampling run.
How to configure screen dimming, auto-lock, and secure lock features during operation.
Guide to setting the duration for a timed sampling operation.
Steps to select and run pre-programmed sampling presets from DataTrac Pro.
Explains flow fault detection, status indicators, and auto-restart attempts.
How to view past sample run summaries directly on the pump.
Instructions for connecting and using the pump with DataTrac Pro software.
Guides for replacing the battery pack, screen cover, and belt clip.
Steps to resolve common pump issues and contact SKC for service.
List of available accessories for the AirChek Connect pump.
List of available replacement parts for the AirChek Connect pump.
General| Display | LCD |
|---|---|
| Data Logging | Yes |
| Type | Personal Sampling Pump |
| Connectivity | Bluetooth |
| Flow Control | Automatic |
| Battery | Lithium ion |
| Operating Temperature | 0°C to 40°C |
