Skeeter FX Series User Manual

INTRODUCTION
Thank you for choosing a Skeeter boat. This Owner’s/
Operator’s Manual contains information you will need
for proper operation, maintenance, and care. A
thorough understanding of these simple instructions
will help you to obtain maximum enjoyment from your
new boat. If you have any questions about the
operation or maintenance of your boat, please consult
a Skeeter Dealer.
Because Skeeter has a policy of continuing product
improvement, this product may not be exactly as
described in this Owner’s/Operator’s Manual.
Specifications are subject to change without notice.
This manual should be considered a permanent part of
this boat and should remain with it even if the boat is
subsequently sold.
This document contains many of Yamaha’s valuable
trademarks. It may also contain trademarks belonging
to other companies. Any references to other companies
or their products are for identification purposes only,
and are not intended to be an endorsement.
RECORD IMPORTANT INFORMATION!
In addition to this manual, your Skeeter boat is
supplied with component manufacturer information
such as instructions, warranties, or other important
information. Read these materials carefully.
Safeguard information about your Skeeter boat by
recording the Hull Identification Number (HIN) and the
model of your boat, and the model and serial numbers
of your outboard motor, trailer, and accessories.
Your HIN is located on the top right side of the
transom, above the water line. The U.S. Coast Guard
requires that your HIN be permanently affixed and
remain on the top right side of the transom.
Front Matter_2012_Front Matter_horiz.qxd 2/21/12 2:36 PM Page 1

Skeeter FX Series Specifications

General

Max Horsepower	150 hp
Max Persons Capacity	4
Beam	94 in.
Max Load	1, 400 lb.
Category	Bass
Length	18 ft. 10 in.

Summary

Introduction and Safety

Record Important Information!

Record essential boat and component details for future reference and safety.

Boating Safety Essentials

Key safety information, including manual warnings and alerts for safe boating.

Operational Requirements and Limitations

Essential requirements for safe boat operation, including operator age and limitations.

Rules of the Road and Operation

Basic Rules of the Road

Regulations for preventing collisions and ensuring safe navigation on waterways.

Before Starting the Engine

Critical pre-start checks and procedures to prevent severe injury or death.

Docking Procedures

Safe techniques for approaching and securing the boat to a dock.

Boat Layouts, Systems, and Controls

Boat Series Layouts

Helm and deck layouts for various Skeeter boat series.

Electrical, Fuel, Bilge, and Livewell Systems

Overview of key boat systems and their operation.

Controls, Indicators, and Switches

Explanation of boat controls, gauges, switches, and circuit protection.

Maintenance, Troubleshooting, and Storage

Care and Maintenance Procedures

Guidelines for maintaining the boat's finish, systems, and components.

Troubleshooting Common Issues

A guide to identifying and resolving performance and electrical problems.

Storage and Trailering Procedures

Essential steps for proper boat storage and safe trailering.

Appendices

Glossary of Terms

Definitions of common boating and boat terminology.

Float Plan and Warranty Information

Safety plan template and details on limited warranty coverage.