CARE / MAINTENANCE
11-1
This section describes how to care for and maintain
your Skeeter boat. Periodic inspection and maintenance
of items listed in this section are absolutely necessary.
REPAIRS AND MODIFICATIONS
Your Skeeter boat is designed for safety in the harsh
marine environment and thoroughly tested and
certified for compliance with applicable safety
standards. Because of the possibility of interference
with the design of the boat, owner installation of
additional equipment or modification of factory
equipment is not recommended.
In addition, DO NOT attempt to make repairs unless
you are certified to do so, have the necessary
authorized repair information, and use approved
marine replacement parts.
Your Skeeter Dealer is qualified to make such repairs,
additions, or modifications to your boat that will not
compromise safety, design integrity, or warranty
coverage.
ELECTRICAL
An electrical system problem must be treated
seriously. Do not operate your boat knowing there is a
problem with the system. When a problem is
discovered, have your Skeeter Dealer service it
immediately.
NOTE: The electrical system is designed to
protect your boat from short circuits or an
overload condition. Any modifications to
the system should be done by your
Skeeter Dealer.
Use extreme caution when checking for an
electrical problem.
WARNING
Section 11_2012_Section 12_horiz.qxd 2/22/12 12:07 PM Page 11-1
To Next Page
