CONTROLS / INDICATORS
7-11
I-SERIES HELM KEYPAD CONTROL SYSTEM
I-Series boats are equipped with an integrated keypad-style control system. The helm-mounted keypad control
panel incorporates button switches that control various boat features. To switch a keypad-controlled feature on
or off, press directly on the outlined button of the desired feature on the keypad. Each keypad button uses a
lighted LED to indicate if the keypad circuit is on or off.
Keypad Control System Features
Keypad Backlight
The keypad panel is equipped with a backlight. The backlight will turn on and stay on when the power button is
on. The backlight will turn on for 15 seconds when the power button is off and a keypad button is pressed.
Circuit Protection
The keypad control system is equipped with internal circuit protection. If a circuit draws more than the rated
current, the circuit will be turned off and the indicator LED will flash to indicate the circuit was tripped. To reset
the circuit, push and hold the tripped circuit button in for approximately 5-6 seconds.
Section 7_2009.qxd:Section 7_horiz.qxd 1/20/09 8:53 AM Page 7-11
To Next Page
