BASS BOATS
3-27
To recirculate the water in the livewell while the boat is “ON” or “OFF PLANE” or while on the boat is on the
trailer:
1. Fill the livewell with water.
2. Close the actuator valve to the livewell.
3. Position the RECIRC button on the helm to the “AUTO” or “ON” position.
4. Position the FILL button on the helm to OFF.
5. Push the pump-out valve inside the livewell IN.
Pump-Out Valve (pushed IN)
Figure 3-15
SKE-0030-A
Section 3_2009.qxd:Section 3_horiz.qxd 1/19/09 4:54 PM Page 3-27
To Next Page
