SKF 086501 User Manual

11. System configuration
11.4 Amount of pumps
Selecting the amount of pumps
Step Key Display Description
Select the amount of pumps - only in Supervisor password level
1
• Open the System configuration menu
• Use<down/up arrow key> to select Amount of pumps menu
)Entry of the maximum number of pumps for the entire lubrication system
• Press <OK control key>
• You will enter the Amount of pumps menu.
• Press <Select control key>
• Use <down/up arrow key> to enter the amount of pumps, (maximum of 3 pumps)
• Press <Save control key>
• Press <Back control key>
)You will return to the System configuration menu
Amount of pumps
Amount of pumps
[1 pump]
System configuration
Amount of pumps
Setting the pump
Set Params to Default
Select
Back
SelectBack
EN
105
11

SKF 086501 Specifications

General

Brand	SKF
Model	086501
Category	Controller
Language	English