SKF TKSA 71 User Manual

SKF Shaft Alignment Tool
TKSA 71
Quick Start Guide
1. Description
1
2
3
4
5 6 7
8
1. Measuring unit S 5. Laser pitch
2. Connection blue LED 6. Power button
3. Charging red LED 7. Measuring unit M
4. Power on green LED 8. Serial number

SKF TKSA 71 Specifications

General

Type	Shaft alignment tool
Laser class	Class 2
Laser output power	< 1 mW
Ambient light protection	Yes
Wireless communication	Bluetooth
Ingress protection	IP54
Power supply	Rechargeable Li-ion battery
Battery operating time	Up to 10 hours
Camera	No
Operating temperature	-10°C to +50°C
Storage temperature	-20 to +60 °C
Relative humidity	10 to 90% RH (non-condensing)
Display unit	Color touchscreen
Supported shaft diameters	20 to 150 mm
Weight	1.5 kg

Summary

Description of SKF TKSA 71

Compatible Display Devices

Installing SKF TKSA 71 Apps

Available SKF Alignment Apps

Shaft Alignment App

Aligns machines with horizontal shafts.

Vertical Shaft App

Aligns machines with vertical shafts.

Spacer Shaft App

Aligns machines with spacer shafts.

Machine Train App

Aligns machine trains.

Soft Foot App

Identifies and corrects soft foot conditions.

Values App

Uses measuring heads like digital dial gauges.

Support Information

Instructions for Use

Finds complete instructions in app help section and SKF.com/Alignment.

Technical Support

Access SKF Technical Support via app help section or www.skf.com/cm/tsg.

Instructional Videos

Short instructional videos are available in the app help section.

Mounting the Measuring Units

Safety Recommendations

EC Declaration of Conformity