EasyManua.ls Logo

Ski-Doo MX - Pre-Start Checklist

Ski-Doo MX
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PRE-START
CHECK
______
_
Check
Points
ACTIVATE
THE
THROTTLE
CONTROL
LEVER
SEVERAL
TIMES
to
check that
it
operates easily and smoothly. The
throttle control lever must return
to
idle position when released.
Check that the skis and the track are
not frozen to the ground or snow sur-
face and
that
steering operates free-
ly.
Activate the brake control lever and
make sure the brake fully applies be-
fore the brake control lever touches
the handlebar grip.
Check coolant level. Liquid should
be
60
mm
(2
3/8
in) lower than top
of
radiator (engine cold).
A015
002
021
Maximum level
60
mm
(2
3/8
in)
from
top
If additional coolant
is
necessary or if
entire system has
to
be refilled, use a
solution
of
three (3) parts
of
antifreeze
for
two
(2) parts
of
water (60°/o anti-
freeze,
40°/o water).
(See
~~cooling
Sys-
tem"
in
II
Storage,' section).
0
NOTE:
Always use ethylene-glycol
antifreeze containing corrosion in-
hibitors specifically recommended for
aluminum engines.
20
---------------------------
.A.. WARNING: Before removing
the
T radiator pressure cap place a cloth
over the cap and unscrew
it
to
the first
step
to
release the pressure. Never drain
or
refill
the
cooling
system
when
en-
gine is hot. Loss.
of
fluid and severe
burns could
occur'if
this
notice
is dis-
regarded.
Check injection oil level.
Check fuel level.
Ensure fuel shut-off valve
is
in
fully
opened position.
A015
007 047
Fully
open
R.H.
footrest
Verify
that
the path ahead
of
the ve-
hicle is clear
of
bystanders and ob-
stacles.
Clean and check operation
of
the
head-light, taillight and brakelight.
.A.. WARNING: Only start your snow-
T mobile once all
components
are
checked and
functioning
properly.

Related product manuals