Need help?Do you have a question about the Ski-Doo MX-Z and is the answer not in the manual?
General| Brand | Ski-Doo |
|---|---|
| Model | MX-Z |
| Category | Offroad Vehicle |
| Language | English |
Disregarding safety precautions can lead to injury or death. Keep guide with unit.
Key safety points including parking brake use, throttle operation, engine running conditions, and studding the track.
Notes on electric start models, cable lubrication, maintenance conditions, passenger seating, and operator experience.
Warrants against defects in material/workmanship. Racing use voids warranty.
12 consecutive months for private/commercial use, from delivery date.
Requires purchase from authorized dealer, pre-delivery inspection, and proper maintenance.
Customer must notify dealer within 2 days of defect appearance.
Lists items not covered, e.g., wear, maintenance, abuse, accidents.
Express warranty in lieu of others; excludes incidental/consequential damages.
Describes the function and operation of the throttle lever.
Explains how to apply and release the brake lever.
Details the function of the RER button for electronic reverse.
Procedure for engaging reverse using the RER button and safety warnings.
Explains the dual function of the Start/RER button for starting and reverse.
How to start the engine using the Start/RER button with safety cautions.
Procedure for engaging reverse and forward with Start/RER button.
Explains manual and electric starting ignition switch functions and cautions.
Describes the three functions of the tether cut-out system and safety warning.
How to attach and use the tether cord for starting and stopping the engine.
Explains the digital security system and its operation with the tether cap.
Operation of the push-pull switch to stop and start the engine.
Describes the fuel tank cap with integrated gauge and refueling safety.
Methodical approach to adjusting suspension components one at a time.
How to adjust rear springs for comfort and ride height.
Adjusting center spring for desired steering feel.
Adjusting coupling blocks for desired handling.
Adjusting stopper strap length for weight transfer and steering behavior.
How to adjust front springs for proper handling.
Adjusting damping strength based on weight and conditions.
Corrective measures for front suspension wandering.
Corrective measures for snowmobile instability.
Corrective measures for steering that feels too heavy.
Corrective measures for frequent suspension bottoming.
Corrective measures for track spinning at start.
Specifies two-stroke injection oil and compatible brands.
Required break-in for engine (10 hrs/500km) and belt (50km).
Emphasizes importance of pre-operation check for safety.
Lists items to check before operating, like snow/ice, controls, fuel.
Detailed list of items and operations for pre-operation check.
Reminds to perform checks and ensure proper seating before riding.
Steps to start the engine, including checks and tether cord.
How to start engine in cold weather based on temperature.
How to start the engine using the manual starter.
How to start the engine using the electric starter.
How to start the engine using an emergency starter rope.
How to properly shut off the engine using various switches.
Steps for warming up the vehicle before riding.
What to do if the engine overheats.
Explains the different inspection intervals (10-hr, weekly, monthly, yearly, storage, pre-season).
Detailed table listing maintenance tasks and their required intervals.
Continues the table of maintenance tasks and intervals.
How to check and add hydraulic brake fluid (DOT 4).
How to check chaincase oil level using the dipstick.
How to check and maintain the oil injection reservoir level.
How to check the coolant level in the coolant tank.
How to adjust the TRA drive pulley for maximum power.
How to adjust calibration screws to modify maximum engine RPM.
Possible causes and corrective actions for engine not starting.
Possible causes and corrective actions for loss of acceleration.
Specifications for engine speed, drive belt part number, width, and wear limit.
Specifications for spark plug type/gap and track tension/alignment.
Specifications for fuel type, tank capacity, engine oil, and chaincase oil.
Specifications for cooling system type/capacity and brake fluid.
Specifications for Skandic 500 F and Summit 550 F models.
Specifications for MX-Z 600 HO and Summit 600 HO models.
Specifications for MX-Z/GT 500/600/600 SE models.
Specifications for GT 700 and MX-Z 600 HO Renegade models.
Specifications for Summit 700 X/Adrenaline and Highmark models.
Specifications for Summit 800 HO models.
Specifications for MX-Z 800 HO and Summit 800 HO Highmark models.
To Next Page