FOREWORD
__________________
_
The operator manual and the
SSCC
Snowmobiler's Safety Handbook have
been prepared to acquaint the owner/
operator or passenger
of
a new snow-
mobile with the various vehicle controls,
maintenance and safe operating instruc-
tions.
Each
is
indispensable for the proper
use
of
the product, and should
be
kept
with the vehicle at all times.
Should you have any questions pertain-
ing to the warranty and its application,
please consult the
"Often
Asked Ques-
tion"
section
of
this manual, or your
authorized dealer.
This manual
uses
the following symbols.
......... WARNING: Identifies
an
instruc-
T tion which, if not followed, could
cause serious personal injuries includ-
ing
possibility
of
death.
..r
CAUTION: Denotes an instruc-
T tion which, if not followed, could
severely damage vehicle components.
0
NOTE: Indicates supplementary
information needed to fully com-
plete
an
instruction.
Although the mere reading
of
such in-
formation does not eliminate the hazard,
your understanding
of
the information
will promote its correct use .
......... WARNING: The engines and the
T orresponding components iden-
tified
in
this manual should not
be
uti-
lized
on
product(s) other than those
mentioned
on
the cover page of this
manual.
.........
WARNING:
Maintenance pro-
T cedures and tightening torques
must
be
strictly adhered to, never at-
tempt
repairs unless the appropriate
tools are available.
The information and components/sys-
tem descriptions contained
in
this man-
ual
are correct at time
of
publication.
Bombardier Inc. however, maintains a
policy
of
continuous improvement of its
products
without
imposing upon itself
any obligation to install them on prod-
ucts previously manufactured.
Bombardier
Inc.
reserves the right at
any
time to discontinue or change specifi-
cations, designs, features, models or
equipment without incurring obligation.
The illustrations show the typical con-
struction of the different assemblies and,
in
all
cases, may not reproduce the full
detail or exact shape of the parts shown,
however, they represent parts which
have the same or a similar function.
Most specifications are given in both
metric and customary units. Where pre-
cise accuracy
is
not required, some con-
versions
are
rounded
off
for easier
use.
A shop manual
can
be
obtained for com-
plete service, maintenance and repair in-
formation.
..r
CAUTION: Most components of
T this vehicle are built with parts
dimensioned
in
the metric system.
Most
fasteners are metric and must
not
be
replaced
by
customary fasten-
ers
or vice versa. Mismatched or in-
correct fasteners could cause damage
to the vehicle or possible personal in-
jury.
To Next Page
Loading...
