12
AM Multi-function wrench
AN Hex wrench
SAFETY
GENERAL POWER TOOL SAFETY WARNINGS
- WARNING Read all safety warnings, instructions,
power tool. Failure to follow all instructions listed below may
result in electric shock, re and/or serious injury.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b)
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c)
a power tool. Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a)
Unmodied plugs and matching outlets will reduce risk of
electric shock.
b)
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d)
parts. Damaged or entangled cords increase the risk of
electric shock.
e)
Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
f) If operating a power tool in a damp location is
protected supply. Use of an RCD reduces the risk of
electric shock.
3) PERSONAL SAFETY
a)
A moment
of inattention while operating power tools may result in
serious personal injury.
b)
eye protection. Protective equipment such as a dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
a
cutter/line trimmer
0255
INTRODUCTION
• When equipped with the metal cutting blade, this tool
is intended for cutting brushwood, scrub, bramble and
similar vegetation
• When equipped with the spool system, this tool is
intended for cutting grass and weeds under bushes as
well as on slopes and edges that can not be reached with
a lawn mower
• This tool is neither intended for cutting or chopping
owers nor for composting purposes
• This tool is not intended for professional use
• Check whether the packaging contains all parts as
illustrated in drawing
2
• When parts are missing or damaged, please contact your
dealer
•
3
•
serious injury
TECHNICAL DATA
1
TOOL ELEMENTS
2
A Lock o button
B On/o switch trigger
C Knob for adjusting guide handle
D Handle
E Upper shaft
F Line cutting blade
G Securing knob
H Wing nut for release shaft
J Lower shaft
K Screws for guard
L Gear head
M Metal cutting blade
N Blade guard
P Trimmer line
Q Release button of trimmer head
R Bump knob
S Trimmer guard
T Motor shaft
V Backing ange
W Flange cover
Z Hole for spindle locking
AA Locking ange
AB Nut
AC Loop
AD Harness
AE Strap buckle
AF Securing clip
AG Spool cap
AH Ventilation slots
AJ Battery level indicator
AK Easy storage rail
AL Easy storage hook
To Next Page
Loading...
