To Next PageTo Next Page
Need help?Do you have a question about the Skil 1006 and is the answer not in the manual?
General| Type | Drill |
|---|---|
| Voltage | 120 V |
| Speed | Variable |
| Power Source | Corded Electric |
| Chuck Size | 3/8 inch |
| Amperage | 5.5 A |
The battery charger and its status indicator light.
Switches for power, speed, direction, chuck, torque, clutch, and gear selection.
Integrated spot light and ventilation slots.
Key symbols used on the charger and battery.
Step-by-step illustration for charging the battery pack.
How to change rotation direction and control speed.
Illustrations showing basic drilling and screwdriving actions.
Using torque control and mechanical gear selection.
Procedures for changing bits and fine-tuning torque.
Operating the gear selector and using the built-in spot light.
Proper techniques for holding and guiding the tool.
Illustrations of different bits for various materials.
Examples of using the tool for drilling and screwdriving.
Purpose and intended use of the cordless drill/driver.
Detailed technical data for the tool.
Guidelines for safe operation, workspace, and operator protection.
Safe use, maintenance, and charging procedures for the tool and battery.
Instructions for charging, power, speed, and direction control.
Tips for effective drilling and screwdriving in various materials.
Procedures for keeping the tool and charger clean and functional.
Guidelines for proper disposal of tools and batteries.
Statement of compliance with relevant standards and directives.
Measured noise and vibration emission levels of the tool.
