Skil 2362 - Intended Use

Model number 2372
Voltage rating 7.2 V
No load speed n
0
200/min
Charger 1619X03241
Voltage rating
120 V 60 Hz
Charge time 3-5 hours
Maximum Capacities
Output drive 1/4" drive
Bolt capacity 3/8"
Screw driving in wood: 1/4" screws
Manual Torque 400 in-lbs
-13-
Functional Description and Specifications – 2372
Disconnect battery pack from tool or place the switch in the locked or off
position before making any assembly, adjustments or changing
accessories
. Such preventive safety measures reduce the risk of starting the tool accidentally.
!
WARNING
Cordless Power Wrench
FIG. 7
OUTPUT DRIVE
FORWARD/REVERSING
LEVER
TRIGGER
"ON-OFF" SWITCH
INTENDED USE
This tool is intended for the fastening and
loosening of bolts, nuts and various threaded
fasteners. This tool is not intended for use as a
drill.
INSERTING AND REMOVING
ACCESSORIES
Attach only high quality accessories with the
proper size square drive designed for use with
power wrenches.
Your power wrench is equipped with a 1/4"
square drive.
To install an accessory, simply push
completely onto output drive. To remove, pull
accessory off output drive (Fig. 8).
Operating Instructions
SOCKET
OUTPUT DRIVE
FIG. 8
BIT
HOLDER
SCREWDRIVER
BIT
SM 1619X03291 05-08 5/28/08 1:52 PM Page 13