9
! if the tool does not run with wheel E in position 1,
select a higher sawing speed and lower the
sawing speed while the tool runs
0
2
! always select “0” when sawing splinter-sensitive
material
!
! do not use vacuum cleaner when cutting metal
!
@
! for T-shank blades only
#
! while working, always hold the tool at the
grey-coloured grip area(s) $
! ensure that the blade has come to a complete
standstill, before you lift the tool from
the workpiece
2
APPLICATION ADVICE
%
! tool accepts most commonly available T-shank
and U-shank blades ^
&
MAINTENANCE / SERVICE
2
! disconnect the plug before cleaning
undismantled
ENVIRONMENT
Do not dispose of electric tools, accessories and
packaging together with household waste material
*
DECLARATION OF CONFORMITY
Technical file at
Arno van der Kloot
Vice President
Operations & Engineering
SKIL Europe BV, 4825 BD Breda, NL
Jan Trommelen
Approval Manager
NOISE/VIBRATION
✱
✱
✱
increase
reduce
! protect yourself against the effects of vibration
by maintaining the tool and its accessories,
keeping your hands warm, and organizing your
work patterns
To Next Page
