7
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc.,
in accordance with these instructions, taking into
account the working conditions and the work to be
performed.
5) SERVICE
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
SAFETY INSTRUCTIONS FOR DRILL/DRIVERS
you start working
when original accessories are used
16 years
the tool
Secure the workpiece (a workpiece clamped with
Hold the power tool only by the insulated gripping
surfaces when performing an operation where the
accessory may contact hidden wiring or its own
power cord
Use suitable detectors to find hidden utility lines or
call the local utility company for assistance (contact
damaging a gas line can result in an explosion;
penetrating a water pipe will cause property damage or
Do not work materials containing asbestos (asbestos
reactions and/or respiratory diseases to the operator or
wear a dust mask and work with a dust
extraction device when connectable
wear a dust
mask and work with a dust extraction device
when connectable
materials you want to work with
complete standstill
• Alwaysdisconnectplugfrompowersourcebefore
making any adjustment or changing any accessory
USE
4
5
6
2
! change direction of rotation only when tool is at a
complete standstill
7
- insert the bit as deep as possible in the chuck
! do not use bits with a damaged shank
8
and increase until the desired depth has been reached
9
! while working, always hold the tool at the
grey-coloured grip area(s)
2
- do not apply too much pressure on the tool; let the tool
APPLICATION ADVICE
0
! only use sharp bits
- lubricate drill bit occasionally with oil
the wood
a hole
!
To Next Page
Loading...
