To Next PageTo Next Page
Need help?Do you have a question about the Skil 6445 and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Chuck Size | 1/2 inch |
| No Load Speed | 0-2, 600 RPM |
| Amperage | 7.0 Amps |
| Voltage | 120V |
| Speed | Variable Speed |
| Cord Length | 6 ft |
| Power Type | Electric |
Keep work area clean, well lit, and free from flammable substances.
Proper plug usage, avoiding grounded surfaces, and protecting against wet conditions.
Stay alert, use PPE, prevent unintentional starting, dress properly, and maintain balance.
Guidelines for using and maintaining power tools, including proper handling and storage.
Specific safety precautions for operating hammer drills, like ear protection and handling.
Explains common symbols used on the tool for voltage, current, speed, and safety.
Identifies key parts of the hammer drill and lists maximum drilling capacities for different materials.
Details how to use the variable speed trigger and the lock-on feature for continuous operation.
Explains how to insert and tighten drill bits using the chuck key for secure attachment.
Describes the function and adjustment of the auxiliary handle and depth gauge for better control.
Guides on selecting between drill-only and hammer-drill modes for different materials.
Provides advice on drilling wood, metal, and masonry for optimal results and tool longevity.
Recommends professional servicing, proper lubrication, and care for brushes and bearings.
Outlines safe cleaning methods using compressed air and warns against certain cleaning agents.
Advises on selecting appropriate extension cords based on tool ampere rating and cord length.
Details the warranty period, exclusions, and limitations for SKIL power tools.
