6
Carrying power
tools with your nger on the switch or
energising power tools that have the
switch on invites accidents.
d)
A wrench or a key left
attached to a rotating part of the power
tool may result in personal injury.
e)
This enables better control of the
power tool in unexpected situations.
f)
Loose clothes,
jewellery or long hair can be caught in
moving parts.
g)
Use of dust collection can reduce
dust-related hazards.
a)
The correct power tool
will do the job better and safer at the
rate for which it was designed.
b)
Any power tool that cannot be
controlled with the switch is dangerous
and must be repaired.
c)
Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
d)
Power tools are dangerous in the
hands of untrained users.
e)
Many accidents are caused by
poorly maintained power tools.
f)
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g)
Use of the power tool for operations
dierent from those intended could
result in a hazardous situation.
a)
This will ensure that the safety of the
power tool is maintained.
• Check the functioning of the tool
before each use and, in case of a
defect, have it repaired immediately by
a qualied person; never open the tool
yourself
• Inspect tool cord and plug before each
use and, if damaged, have them
replaced by a qualied person
• Use completely unrolled and safe
extension cords with a capacity of
16 Amps (U.K. 13 Amps)
• Inspect the extension cord periodically
and replace it,
if damaged
• Use the tool and its accessories in
accordance with this instruction
manual and in the manner intended for
the tool; use of the tool for operations,
dierent from those normally expected
to be performed by the tool, could
result in a hazardous situation
• This tool should not be used by people
under the age of 16 years
• This tool is not intended for use by
persons (including children) with
reduced physical, sensory or mental
To Next Page
Loading...
