To Next PageTo Next Page
Need help?Do you have a question about the Skil 9216 and is the answer not in the manual?
Guidelines for maintaining a safe and clear work area, avoiding explosive atmospheres, and keeping children and bystanders away.
Precautions regarding power tool plugs, grounding, wet conditions, cord usage, and GFCI protection.
Advice on staying alert, using PPE, preventing unintentional starts, proper footing, and avoiding loose clothing.
Key practices for operating reciprocating saws safely, including grip, workpiece securing, blade clearance, and trigger use.
Instructions on using correct blades, checking tool components, and performing pre-cut checks for safety and performance.
Mandatory use of safety goggles or eye protection and dust masks for applications generating dust.
Importance of GFCI and protective gear like rubber gloves and footwear for enhanced personal safety.
Warnings against using AC-only rated tools with a DC power supply to prevent hazards.
Guidelines for tool maintenance, cleaning agents, and power cord servicing to prevent hazards.
Information on chemicals in construction dust and protective measures for reducing exposure.
Explanation of symbols related to electrical units (Volts, Amperes, Hertz, Watt) and measurements (kg, min, s, Ø).
Details symbols for tool settings (speed, selectors), operation (arrow), and safety alerts (warning, manual, PPE).
Indicates symbols designating the tool's listing by Underwriters Laboratories (UL).
Explains symbols for listing by the Canadian Standards Association (CSA) for US and Canadian standards.
Details symbols for listing by Intertek Testing Services (ETL) for US and Canadian standards.
Identifies the symbol indicating compliance with NOM Mexican Standards.
Labeled illustration of the reciprocating saw, detailing key components like the blade clamp and speed dial.
Crucial warning to disconnect power before any assembly, adjustments, or accessory changes.
Guidance on selecting the correct saw blade for various materials to ensure proper cutting performance.
Step-by-step instructions for safely installing a saw blade, including warnings about blade extension and footplate contact.
Explanation of the variable speed dial for adjusting blade stroke rate based on material and cutting needs.
Instructions on adjusting the footplate for optimal contact, blade life, and depth control during cuts.
Guidance on securely clamping work, holding the tool, and maintaining proper footing during operation.
Tips for reducing wear, including blade orientation for fine work, blade selection, and footplate settings.
Recommendations for cutting metal, including lubrication, sandwiching thin metal, and avoiding forcing the cut.
Instructions for making plunge cuts in softer materials without a pilot hole, including blade orientation and tool angle.
Warnings against plunge cutting in metal or thick/hard materials; alternative cutting methods.
Advice on professional service for tool maintenance and repair to ensure safety and prevent hazards.
Information on tool lubrication and recommended inspection intervals for carbon brushes for peak efficiency.
Safe cleaning methods using compressed air, wearing safety goggles, and avoiding specific cleaning agents.
Common causes and remedies for a saw that fails to start, including power supply and switch issues.
Troubleshooting steps for a blade that does not reach the correct speed, focusing on extension cords and voltage.
Diagnosing and resolving excessive vibration, typically related to bent blades or loose blade holders.
Solutions for cutting issues like binding, motor stalling, or kickback caused by dull blades or improper technique.
Details of the limited warranty period, coverage, exclusions, and claim procedures for SKIL power tools.
Information on limitations of implied warranties and exclusion of incidental or consequential damages.
General
