To Next PageTo Next Page
Need help?Do you have a question about the Skil HD55 and is the answer not in the manual?
General| Weight | 3.5 kg |
|---|---|
| Type | Circular Saw |
| Electric Brake | No |
| Dust Port | Yes |
| No-Load Speed | 5000 rpm |
| Cutting Depth at 90° | 55 mm |
| Cutting Depth at 45° | 38 mm |
| Max Cutting Depth at 90° | 55 mm |
| Max Cutting Depth at 45° | 38 mm |
| No Load Speed | 5000 rpm |
Provides toll-free contact information for consumer support and service locations.
Indicates where to find instructions in different languages.
Guidelines for maintaining a safe and clean work environment.
Precautions related to electrical connections and usage.
Recommendations for operator's safety and awareness.
Information about professional servicing and maintenance for power tools.
Safe practices and techniques for cutting operations.
Explains kickback causes and operator prevention methods.
Lists the maximum cutting dimensions for the saw.
Step-by-step instructions for attaching the saw blade.
Explanation of the Vari-Torque Clutch and its function in preventing kickback.
How to adjust the cutting depth of the saw blade.
Procedures to check and set cutting angles (90° and bevel).
How to adjust and use the line guide for accurate cuts.
Techniques and recommendations for making cross cuts.
Steps for performing plunge cuts with the saw.
Guidance on cutting large panels and boards safely.
Instructions for making rip cuts using the saw.
Recommendations for inspecting and replacing carbon brushes.
Guidance on bearing maintenance and replacement intervals.
Procedures for safely cleaning the power tool.
Tips for maintaining and sharpening saw blades.
Table detailing recommended extension cord sizes for the tool.
