Skil 3540 User Manual

WARNING: To reduce the risk of injury, the user must read and understand the
Owner’s Manual before using this product. Save these instructions for future reference.
AVERTISSEMENT : Afin de réduire les risques de blessure, l’utilisateur doit lire et
comprendre le guide d’utilisation avant d’utiliser cet article. Conservez le présent guide
afin de pouvoir le consulter ultérieurement.
ADVERTENCIA : Para reducir el riesgo de lesiones, el usuario debe leer y comprender
el Manual del operador antes de utilizar este producto. Guarde estas instrucciones para
consultarlas en caso sea necesario.
Owner’s Manual
Guide d’utilisation
Manual del propietario
For Customer Service
Pour le service à la clientèle
Servicio al cliente
Tile Saw
Scie À Céramique
Sierras Para Cortar Baldosa
1-877-SKIL-999
OR
www.skil.com
Model/ Modelo/ Modèle: 3540

Skil 3540 Specifications

General

Type	Circular Saw
Blade Diameter	7-1/4 inches
Motor Power	15 Amp
No-Load Speed	5, 300 RPM
Weight	8.5 lbs
No Load Speed	5, 300 RPM
Cord Length	6 feet
Arbor Size	5/8 inches
Bevel Capacity	51 degrees

Summary

General Safety Rules for Bench Top Tools

Work Area Safety

Guidelines for maintaining a safe and organized work environment.

Electrical Safety Precautions

Essential safety measures for electrical connections and tool usage.

Personal Safety Guidelines

Recommendations for operator attire, focus, and safe practices.

Tool Use and Care

Specific Safety Rules for Tile Saws

Critical safety instructions tailored for operating tile saws.

Tool Service and Maintenance

Guidance on professional service and repair for the tool.

Location Requirements

Know Your Cutting Tools

Motor Specifications and Electrical Requirements

Motor Specifications

Details on the tool's motor power and voltage requirements.

Connection To A Power Source

Instructions for safely connecting the tool to the electrical supply.

Extension Cords

Recommended Extension Cord Sizes

Guidance on selecting the appropriate gauge and length for extension cords.

Symbols Explained

Safety Symbols

Explanation of various safety alert symbols and their meanings.

Damage Prevention Messages

Information to prevent equipment or property damage.

Symbols (Continued)

Symbol Reference Table

A table defining common symbols used on the tool and in the manual.

Symbols (Continued)

Read Manual Symbol

Alerts the user to consult the manual for important information.

Wear Eye Protection Symbol

Indicates the necessity of wearing eye protection during operation.

Symbols (Certification Information)

Certification Marks Explained

Explains symbols for UL, CSA, ETL, and NOM certifications.

Glossary of Terms

Key Terminology Definitions

Definitions of essential terms used in the manual.

Unpacking and Checking Contents

Component and Tool Checklist

Lists included parts and required tools for assembly.

Getting to Know Your Tile Saw

Component Identification

Diagram identifying key parts and features of the tile saw.

Assembly and Adjustments

Tile Blade Installation

Step-by-step guide for installing or replacing the tile saw blade.

Top Guard Installation

Instructions for mounting the top guard onto the saw.

Top Guard Arm Adjustment

How to adjust the positioning of the top guard arm.

Operation

Tile Saw Location

Proper placement and environmental considerations for operating the saw.

Filling the Water Trough

Procedure for filling the water reservoir for cooling the blade.

Starting and Stopping

Making a Flat Cut

Making a Miter Cut

Making a Bevel Cut

After Use Procedures

Maintaining Your Tile Saw

Maintenance Procedures

Instructions for cleaning, lubrication, and general upkeep of the saw.

Recommended Accessories

Information on using approved accessories for optimal performance.

Troubleshooting Guide

Limited Warranty Information