Skil 3385-01 User Manual

For English Version Version française Versión en español
See page 2 Voir page 19 Ver la página 36
Operating/Safety Instructions
Consignes d’utilisation/de sécurité
Instrucciones de funcionamiento y seguridad
IMPORTANT: IMPORTANT : IMPORTANTE:
Read Before Using Lire avant usage Leer antes de usar
1-877-SKIL999 (1-877-754-5999) www.skil.com
Call Toll Free for
Consumer Information
& Service Locations
Pour obtenir des informations et
les adresses de nos centres de
service après-vente,
appelez ce numéro gratuit
Llame gratis para
obtener información
para el consumidor y
ubicaciones de servicio
3385-01
SM 2610957105 05-08 6/5/08 7:39 AM Page 1

Skil 3385-01 Specifications

General

Brand	Skil
Model	3385-01
Category	Saw
Language	English

Summary

General Safety Rules

Additional Safety Rules

Specific Safety Rules for Band Saws

Laser Safety Precautions

Essential safety measures for the laser guide system.

Assembly and Adjustments: Table Installation

Install the Table

Step-by-step guide to attaching the saw table.

Assembly and Adjustments: Fence, Mounting, Dust Collection

Install the Fence

Procedure for attaching and positioning the fence.

Assembly and Adjustments: Blade Tension and Tracking

Blade Tension Adjustment

Setting correct blade tension for optimal cutting performance.

Blade Tracking Adjustment

Aligning the blade to ensure straight cuts.

Assembly and Adjustments: Blade Replacement and Guides

Replace the Blade

Step-by-step process for changing the saw blade.

Blade Guide Adjustment

Adjusting guides for proper blade support and alignment.

Assembly and Adjustments: Lower Guides and Height Setting

Adjust Lower Blade Guides

Fine-tuning the lower blade guide assembly.

Set Blade Guide Assembly Height

Positioning the upper guide assembly relative to workpiece.

Operation: Controls and Features

ON/OFF Switch and Safety Key

Laser Line Operation

Cutting Techniques

Blade Selection Guide

Troubleshooting

Saw Will Not Start

Blade Speed and Cutting Problems