2
TABLE OF CONTENTS
General Power Tool Safety Warnings .............................3-4
Chain Saw Safety Warnings .....................................4-6
Additional Warnings ...........................................7-8
Symbols ....................................................9-12
Get to Know Your Chain Saw .....................................13
Specications .................................................14
Recommended Bar and Chain for This Chain Saw ................14-15
Operating Instructions .......................................16-24
Maintenance ................................................ 25-32
Troubleshooting ............................................33-34
Limited Warranty of SKIL Consumer Tool ...........................35
WARNING
•
Some dust created by power sanding, sawing, grinding, drilling and other construction
activities contains chemicals known to the State of California to cause cancer, birth defects
or other reproductive harm. Some examples of these chemicals are:
–
Lead from lead-based paints.
–
Crystalline silica from bricks, cement, and other masonry products.
–
Arsenic and chromium from chemically-treated lumber.
•
Your risk from these exposures varies, depending upon how often you do this type of work.
To reduce your exposure to these chemicals:
–
Work in a well-ventilated area.
–
Work with approved safety equipment, such as dust masks that are specially designed to
lter out microscopic particles.
–
Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and
other construction activities. Wear protective clothing and wash exposed areas with soap
and water. Allowing dust to get into your mouth or eyes or to lie on the skin may promote
absorption of harmful chemicals.
To Next Page
Loading...
Need help?
General
