REVISED 16. JUNE. 2017
Installing the Unit
1. Avoid heat source
Avoid direct sunlight, uneven surface, hot environment beyond recommended ambient
temperature of the cabinet.
The unit must NOT be situated where it is affected by hot air from adjacent equipment as this will
compromise the airflow and performance of the cabinet.
2. Levelling
If the cabinet is installed on an even surface or not levelled, water from condensate tray may
overflow.
Once, water leakage occurs by inappropriate levelling, the unit has to be re-levelled. Turbo Air is
not obligated to provide warranty service in case of operator error.
A spanner and four spacers are included in a package. A scissor jack (car jack) is required to lift
up the cabinet for easy placement of the spacers.
Loosen the screw to provide enough gap for spacers and fasten it.
To Next Page
Loading...
