Skipper SB-100-SA - User Manual

SKIPPER Electronics AS
Enebakkveien 150
P. O. Box 151, Manglerud
0612 Oslo, Norway
www.skipper.no
Telephone: +47 23 30 22 70
E-mail: support@skipper.no
Document no: DM-BSB100 Rev 2012
Edition: 12.08.2020
100mm
Single bottom sea valve
Installation and operation Manual
SB-100-SA
SB-100-SB

Summary

Introduction

Space Considerations for Installation

Welding the Bottom Flange

Sea Valve Assembly Procedures

Assembling Extension Tube and Sensor

Sensor Installation Steps

Clamp Unit Mounting

Lowering the Sensor

Sensor Forward Orientation

Final Assembly of the Sea Valve

Sensor Removal Procedure

Re-installation of the Sea Valve

Illustrated Parts List Shipment

Illustrated Parts List Assembled SB-100-SA

Illustrated Parts List Assembled SB-100-SB

Maintenance of the Sea Valve

Maintenance Tasks for Inactive Sensors

Procedures for maintaining sensors when the system is not in use for extended periods.

Dry Docking in Freezing Temperatures

Precautions for dry docking a vessel in sub-zero temperatures to prevent damage.

Skipper SB-100-SA Specifications