Skoda Enyaq 2021 User Manual

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.
Workshop Manual
Citigo 2012 ➤, Citigo-e iV 2020 ➤,
Enyaq 2021 ➤, Enyaq Coupe 2021 ➤,
Fabia 2000 ➤, Fabia II 2007 ➤,
Fabia II 2009 ➤, Fabia II 2011 ➤,
Fabia III 2015 ➤, Fabia IV 2022 ➤,
Kamiq 2019 ➤, Karoq 2018 ➤,
Karoq 2020 ➤, Kodiaq 2017 ➤,
Kodiaq 2019 ➤, Kushaq 2021 ➤,
Octavia 1997 ➤, Octavia II 2004 ➤,
Octavia II 2010 ➤, Octavia III 2013 ➤,
Octavia III 2014 ➤, Octavia IV 2020 ➤,
Octavia IV 2021 ➤, Rapid 2011 ➤,
Rapid NH 2013 ➤, Rapid NH 2014 ➤,
Roomster 2006 ➤, Scala 2019 ➤,
Slavia 2022 ➤, Superb 2002 ➤,
Superb II 2008 ➤, Superb III 2015 ➤,
Yeti 2010 ➤, Yeti 2011 ➤
Electrical System - general notes
Edition 12.2021
Service
Service Department. Technical Information

Skoda Enyaq 2021 Specifications

General

Brand	Skoda
Model	Enyaq 2021
Category	Automobile
Language	English

Summary

27 - Starter, Current Supply, CCS

1 Battery

Details battery types, inspection, maintenance, and safety precautions.

2 Checking Battery

Procedures for assessing battery condition using visual inspection and testers.

3 Charge Battery

Guidelines and procedures for safely charging vehicle batteries.

97 - Wiring

1 Vehicle Diagnosis, Testing, and Information Systems

Safety instructions and connection procedures for diagnostic testers.

2 Wiring Harness Repair - General

3 Safety-Critical Wiring Repair

Procedures for repairing airbag and belt tensioner wiring.

4 Common Wiring Repair Techniques

5 - Repairing Optical Fibres

5.2 Preparing Optical Fibres

5.3 Removing and Installing Optical Fibre

6 - Contact Surface Cleaning Set -VAS 6410-

6.2 Cleaning and Repair Procedures

Procedures for cleaning cable eyes, screwed connections, and battery poles.

7 - Replace the Lambda Probe

7.1 LSF Lambda Probe Replacement

Procedure for replacing the LSF lambda probe.

7.2 LSU Lambda Probe Replacement

Procedure for replacing the LSU lambda probe.