Airbag system 169
Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical Data
• Any work on the side airbag system including removing and
installing system components because of other repair work (e.g.
removing seats) must only be carried out by a specialist garage.
Head airbags*
Description of the head airbags
The head airbag together with the side airbag offers
enhanced occupant protection in the event of a side colli-
sion.
The head airbags are positioned above the doors on both sides in the inte-
rior of the car ⇒ fig. 147. The installation positions are each marked with
the “AIRBAG” logo.
The head airbag together with the three-point seat belts and the side
airbags, offers additional protection for the head and neck area of the
occupants in the event of a side collision of major severity ⇒ in “Impor-
tant safety information on the head airbag” on page 170.
Apart from their normal protective function, a further task of the seat belts
is to also hold the driver and the occupants in a correct seated position in
the event of a side collision so as to enable the head airbags to offer the
maximum protection.
You should therefore always fasten ⇒ page 155, “Why seat belts?” the
seat belts, not only because this is required by law, but also for safety
reasons and for your own protection.
Together with other elements (such as cross bars in the seats, stable
vehicle structure) the head airbags are the consequent further develop-
ment of occupant protection in the case of side collisions.
WARNING (continued)
Fig. 147 Installation
position of the head
airbags
.
,
.
To Next Page
Loading...
