Seats and Stowage92
CargoFlex folding box*
Lowering and securing folding box
You can transport the folding box in two different positions - in the
transport position against the partition ⇒ fig. 79 of the luggage
compartment, or in the ready position lowered onto the floor of
the luggage compartment ⇒ fig. 80.
Lowering folding box into the ready position
– Pull the snap handle in direction of arrow 1 ⇒ fig. 79. The
folding box is lowered to just above the floor of the luggage
compartment.
– Press the folding box at the arrow positions 2 ⇒ fig. 80 onto
the floor of the luggage compartment until it locks in place. If
correctly locked, the snap handle moves back into its initial
position (the top red surface of the handle is not visible).
Securing folding box in the transport position against
partition of luggage compartment
– Lower the folding box into the ready position ⇒ page 94.
– Pull the snap handle in direction of arrow 1 ⇒ fig. 79. The
folding box is raised up from the luggage compartment floor.
– Raise and press the folding box against the partition of the
luggage compartment, it is secured audibly in this way in the
transport position. If correctly locked, the snap handle moves
back into its initial position (the top red surface of the handle
is not visible).
Opening folding box ⇒ page 93.
Fig. 79 Folding box:
Transport position
Fig. 80 Folding box:
ready position
.
,
.