Inspecting and Replenishing218
Inspecting and Replenishing
Engine compartment
Bonnet remote release
Bonnet remote release
– Pull the unlocking lever below the dash panel on the driver's
side ⇒ fig. 172.
The bonnet jumps out of its lock as a result of the spring force. A handle
appears at the same time in the radiator grille.
Opening and closing the bonnet.
Opening the bonnet
– Unlock the bonnet ⇒ fig. 172.
– Ensure that the arms of the windscreen wipers are correctly in
place against the windscreen before opening the bonnet
otherwise damage could occur to the paintwork.
– Press the locking button ⇒ fig. 173 and open the bonnet.
Closing the bonnet
– Pull the bonnet down far enough to overcome the force of the
pressurized gas spring.
Fig. 172 Bonnet
release lever
Fig. 173 Radiator
grille: handle
.
,
,
To Next Page
Loading...
