Seats and Stowage 89
Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical Data
Switching on and off
– The cooling action of the cool box is switched on and off using
switch ⇒ page 88, fig. 75. It is signalised by the lighting up
of the indicator light on the switch.
You can remove the cool box if necessary ⇒ page 90. You can replace the
cool box with a storage net ⇒ fig. 76.
Caution
Never cover the ventilator on the cool box otherwise it will overheat and
could be damaged.
Note
The cool box also operates if the ignition is switched off. The battery will
not run down fully, however, since the system is fitted with a device which
monitors the battery charge level. The cool box will be automatically
switched off when it is threatening to empty the battery.
Partition with storage net
If the cool box is removed, install the partition with the storage net
⇒ fig. 76 which is fixed with a velcro fastener to the side wall of
the cool box.
– The partition is installed and removed in a similar way to the
cool box ⇒ page 90.
A
Fig. 76 Partition with
storage net
.
,
,
To Next Page
Loading...
