›
Turn on the Infotainment’s Wi-Fi unit in the menu
item
Wi-Fi
Wi-Fi:
Wi-Fi
.
›
Tap
Manual settings
.
›
Enter the name of the hotspot to connect to and
the access password.
›
Tap
Connect
.
›
Wait for the connection to be established and, if
necessary, confirm the respective messages.
Tips for a perfect connection
▶
Keep only the hotspot to be connected switched
on and switch o the other hotspots.
▶
Delete unused hotspots. This shortens the time re-
quired to establish a connection.
▶
For some hotspots, the connection takes longer, so
wait for the connection to finish.
▶
If the connection is interrupted, recheck the availa-
ble hotspots and repeat the connection.
Data connection
Settings
Mobile data
Mobile data for the data connection may be sub-
ject to charges according to the mobile network
operator's tari conditions.
Types of data connection setup
▶
By connecting the Infotainment with the external
hotspot via Wi-Fi.
▶
By using a SIM card with data services inserted in
the external module of the Infotainment.
▶
By connecting the Infotainment with a mobile
phone via the Bluetooth® profile rSAP.
Connection via a data SIM card in the external
module
A SIM card size mini (standard size 25x15 mm) with
enabled data services must be used.
›
Switch on the ignition and the Infotainment.
›
Turn on the menu item in
Telephone interface
"Business"
.
›
Insert a SIM card into the corresponding slot in the
external module in the storage compartment on
the passenger's side .
Insert the SIM card with the bevelled corner on
the left and the contacts facing downwards until
it locks.
NOTICE
When inserting an incorrectly sized SIM card or in
the wrong direction, there is a risk of damage to the
external module.
›
Select one of the following menu items to use the
SIM card.
▶
Calls too
- enabling data and telephone services.
▶
Only data connections
- enabling of data services only.
›
If the SIM card is protected by a PIN code, then the
PIN code of the SIM card must be entered.
›
Confirm the entered PIN code by tapping .
Or:
›
Tap
to save and confirm the PIN code.
›
Set the data service provider’s required network
and confirm the Internet connection.
If your data provider is not available in the list, ask
your provider whether one of the displayed provid-
ers can be used.
Set network parameters
›
Tap
Network
.
›
Set the desired parameters.
For accurate parameters for setting the network,
contact the data service provider.
Set the parameters for the data connection
›
Tap
Network
Data Connection:
.
›
Set the desired parameters.
Connection to the phone via rSAP Bluetooth® pro-
file
›
Switch on the ignition and the Infotainment.
›
Turn on the menu item in
Telephone interface
"Business"
.
›
Turn on the Bluetooth® in Infotainment
Bluetooth
Bluetooth
.
›
Turn on the Bluetooth® visibility of the Infotain-
ment
Bluetooth
Visibility:
Turn on
Visible
.
›
Switch on Bluetooth® and its visibility in the phone.
›
Pair and connect the phone to the Infotainment via
the rSAP Bluetooth® profile.
The prerequisite for establishing an Internet con-
nection is using a telephone with a SIM card with ac-
tive data services.
SmartLink
Functionality
SmartLink oers the ability to display and operate
certified applications from a connected mobile de-
vice in the Infotainment screen.
Certification may be conditional upon the use of the
latest update to the particular SmartLink application.
Applications include, for example, apps for route
guidance, telephoning, listening to music, etc.
Mobile devices can be connected via a USB cable.
Supported connection types
SmartLink supports the following connection types.
▶
Android Auto.
▶
Apple CarPlay.
148
Infotainment Columbus › Data connection
To Next Page
Loading...
