Need help?Do you have a question about the Skope 989E and is the answer not in the manual?
Default factory mode, operates as a conventional heater without timer functionality.
Heater operates on a 3-hour countdown timer that shuts it off automatically after 3 hours.
Controls heater start/stop and mode selection via the POWER button and indicators.
Selector buttons allow users to increase or decrease the desired temperature setting.
Indicators for Fan Only and Freeze Guard settings provide operational status.
Locks temperature settings to prevent accidental changes, while allowing on/off operation.
Procedure to check if Normal Mode or 3-Hour Timer Mode is enabled via audible beeps.
Steps to switch between Normal Mode and 3-Hour Timer Mode using control buttons.
Details on model dimensions, weight, wattage, wiring, and power supply.
Explanation of the auto-reset thermal cutout and fusible link safety features.
Instructions for cleaning the heater using a damp cloth, avoiding abrasives.
Guidance on contacting authorized service agents for heater maintenance.
To Next Page
General
