Need help?Do you have a question about the Skope 990E and is the answer not in the manual?
Instructions for adjusting the electronic thermostat using selector buttons.
Default factory mode for conventional heater operation without a timer.
Mode that shuts off the heater after 3 hours of operation.
Explains the operation of the control panel buttons and indicators, including Power, Fan Only, Freeze Guard, and Tamper Lock.
Step-by-step guide for installing surface-mounted SKOPE fan heaters, including wiring and mounting.
Illustrates dimensions, clearances, and fixing points for surface-mounted heater installation.
Step-by-step guide for installing recessed SKOPE fan heaters, including wall cutouts and wiring.
Shows dimensions, clearances, and fixing points for recessed heater installation in walls.
Procedure to verify if the Normal or 3-Hour Timer mode is currently active.
Instructions for switching between Normal Mode and 3-Hour Timer Mode.
Details physical dimensions and weight for Surface Mounted and Recessed Mounted models.
Covers wattage ratings, wiring types, and supply voltage requirements.
Explains the auto-reset thermal cutout and fusible link for unit protection.
Provides guidance on cleaning the unit and obtaining professional servicing.
Contact details for SKOPE Industries Limited in New Zealand.
Contact details for SKOPE Australia Pty Ltd.
To Next Page
General
