Need help?Do you have a question about the SKP Pro Audio MAX 710X and is the answer not in the manual?
Covers warnings for electric shock, fire, and moisture, plus symbol meanings.
Explains symbols indicating dangerous voltage and important instructions.
Lists important warnings and guidelines for using the amplifier safely.
Details the function of each control and indicator on the amplifier's front panel.
Describes indicator lamps for channel protection, signal presence, and bridge mode.
Details the power connector, speaker outputs, input connectors, and limiter switch.
General| Type | Power Amplifier |
|---|---|
| Channels | 2 |
| Power Output (8 Ohms) | 700W per channel |
| Frequency Response | 20Hz - 20kHz |
| THD | <0.1% |
| Input Impedance | 20k Ohms balanced, 10k Ohms unbalanced |
| Input Sensitivity | 1.4V |
| Cooling | Variable speed fan |
| Protection | Short Circuit, DC, Thermal, Overload, Soft Start |
| Connectors Input | XLR |
| Connectors Output | Speakon / Binding Post |
| Power Supply | AC 50/60Hz |
| Dimensions | 483 x 88 mm |
To Next Page
