Need help?Do you have a question about the SKP Pro Audio MAX G-3600X and is the answer not in the manual?
All safety and operating instructions must be read before connecting and using the product.
Avoid placing the appliance near heat sources or direct contact with liquids.
Ensure proper airflow by not blocking ventilation openings with objects like sofas or carpets.
Connect only to specified power supply types and manage the power cord to prevent damage.
Check for damage after unpacking and choose installation location carefully.
Refer servicing to qualified personnel for any damage or abnormal operation.
Engages power; the amplifier is ready to work when the switch is pushed down.
Blue LED indicates when the amplifier is operating in Bridge mode.
Yellow LEDs indicate unstable status, high temperature, or amplifier faults.
Red LEDs light up when the output signal reaches clipping level or indicates short circuits.
Green LEDs indicate normal operation of the amplifier.
Details on Balanced XLR and 1/4" Jack inputs for mixer outputs.
Removes ultra-low frequencies to optimize power distribution and protect speakers.
Selects amplifier operation mode, with instructions for Bridge mode.
Controls for Low/Mid and Mid/High frequency crossovers.
Modes include Bypass, High, Mid, and Low frequency outputs.
Details on AC voltage input and the resettable fuse mechanism.
Standard Speakon connectors for CHA/CHB and Bridge outputs.
Allows selection between Stereo and Bridge operating modes.
Cuts off input signals below 30Hz when activated.
Activates the internal auto-limiter function.
Details on XLR input connectors for CHA and CHB.
Table detailing output power, impedance, sensitivity, and frequency response.
Includes S/N rate, channel crosstalk, damping factor, and protection features.
Information on cooling system, input/output types, mains power supply, and weight.
General| Brand | SKP Pro Audio |
|---|---|
| Model | MAX G-3600X |
| Category | Amplifier |
| Language | English |
To Next Page
