EasyManua.ls Logo

SKS Germany INFINITY UNIVERSAL User Manual

Default Icon
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
GERMANY
A 1x
F 1x
B 1x
C 1x
D 1x
E 1x
TX25
4.
1.
A
B
2.
3.
1.
A
TOP
2.
1.
D
E
3 Nm
A
1.
2.
F
C
<
31,8 mm
3.
F
1.
B
2.
2x
2.
1 x 1 sec. = ON
1 x 1 sec. = OFF
1.
2,5 h
MANUAL ¬ INFINITY UNIVERSAL REARLIGHT ¬ 11948
ALLROAD ROAD MOUNTAIN
EN . Scope of delivery
EN . Tools
EN
Thread the short rubber band (B) into
the holder (A) and position it over
the tabs on the back. Finally, fold the
loops of the rubber band (B) up and
down on the front.
EN
Place the rear light bracket (A) on
the mounted luggage rack. The bolts
of the bracket (A) must engage in
the holes of the luggage rack.
Please note.
Note the alignment.
01
02
EN . Mounting the rear light
EN
Fix the rear light bracket (A) to the
luggage rack with the washer (D)
and screw (E).
EN
Alternatively, you can mount the rear
light (F) directly on the seat post
using the long rubber band (C).
Please note. Seat post
diameter max. 31.8 mm.
EN
Mount the rear light (F) on the luggage
rack using the loops from the rubber
band (B).
Please note.
Ensure that the rubber
band is correctly seated.
E
N
Operation. To switch on and off,
press the button on the side for
approx. one second. You need a
micro-USB cable (not included in
scope of supply) for charging. The
charging time is approx. 2.5 hours.
03 i
04 i
Question and Answer IconNeed help?

Do you have a question about the SKS Germany INFINITY UNIVERSAL and is the answer not in the manual?

SKS Germany INFINITY UNIVERSAL Specifications

General IconGeneral
BrandSKS Germany
ModelINFINITY UNIVERSAL
CategoryBicycle Accessories
LanguageEnglish

Summary

Mounting the Rear Light

Step 1: Thread Rubber Band

Thread the short rubber band into the holder and position it over the tabs on the back.

Step 2: Place Bracket

Place the rear light bracket on the mounted luggage rack, ensuring bolts engage in holes.

Alternative Seat Post Mounting

Mount the rear light directly on the seat post using the long rubber band.

Step 3: Fix Bracket to Luggage Rack

Fix the rear light bracket to the luggage rack with the washer and screw.

Step 4: Mount Rear Light

Mount the rear light on the luggage rack using the loops from the rubber band.

Operation and Charging

Switching On/Off

Press the button on the side for approximately one second to switch the rear light on or off.

Charging the Battery

A micro-USB cable is needed for charging. Charging time is approximately 2.5 hours.

Safety Instructions

General Safety

Ensure the tensioning rubber is correctly seated to prevent the rear light from falling off.

Battery Care

Fully charge before first use. Recharge every 6 months if unused for long periods.

Intended Use and Disposal

Intended Use

Accessory for SKS Infinity Universal luggage rack or seat post mounting.

Disposal

Dispose of packaging according to regulations. Return used batteries to collection points.

Related product manuals